Rechargeable In-Ground Pet Fence System

Product Description:
​
Rechargeable IN-GROUND DOG FENCING SYSTEM ​
Design a diagram and install the system easily according to the user manual, it helps effectively keep dogs in the limited area without any visual changes in your yard, and the coverage over 1000ft/300 Metres gives enough roaming space.

VARIABLE BOUNDARY DISTANCE WITH 100 LEVEL
Turn on the transmitter, and you can set the signal distance of the wires with “ + ” and “ – ” based on the actual needs in different condition, the higher level you set, the smaller playing area there would be.

EFFECTIVE & HUMAN ANTI_RUN THROUGH SYSTEM
No need to worry about dog escaping from the containment system, automatic correction shall be triggered off and goes up as dog approaching the edge, warning sounds before the static shock, and the dogs can’t “run through “ the signal field without receiving the strong corrections.

HOW TO USE:
​
Warning tones before static shock
As dogs step into the signal field, warning tones will be triggered off for 10 seconds, then static shock + warning tones will force dogs to get back to the safe areas. Dogs will soon realize the connection between corrections and their behavior.
​
Run-through prevention
If dogs try to escape from the system which may lead them into a dangerous condition, the system will try to stop it. 4 beeps + 4 shocks will be activated then 6 beeps + 5 shocks till they return to the limited spaces.

How the buttons work?
ON/OFF Button-Start and shut down the system.

Power LED-Showing the condition of in-ground wire.

Increase/Decrease Transmitter Signal Level-Increase/ decrease signal distance for actual needs.

Display Levels Of Transmitter Signal-Help find out the current signal levels.

To turn the Transmitter on:
Press the power button on the transmitter to turn it on, if it beeps constantly, please check the wire terminals to make sure it’s connected well, the transmitter sends a constant signal with wire underground, which could trigger off the correction program on the receiver within the range.

To turn the Receiver Collar on:
Charge at least 4 hours before using, press the power button to turn on the receiver. The blink indicator light means the battery is running down and needs to be recharged. Test the system before applying onto the dogs, adjust the controlling range to level 1, hold the receiver with a test light on and approach to the wire gradually to make sure the system works normally.

Connect transmitter and receiver:
Wire the system in your yard
In order to wire your yard safely and effectively, you need to circle the forbidden areas where you want to keep your dog away, and you can also divide the whole garden into several parts with wires to keep your dog into the limited areas.

Notes:
1. Make sure the closed loop circuit should be more than 15 meters, and it should be over 100 meters for the maximum correction levels, you can double or triple the loop to meet the standard.
2. Keep the circuit at least 2 meters away from the wires from other facilities, they may interfere with signals.
3. When you need to divide your garden into several parts, make sure the isolated areas should be at least 3 meters from the others.

Package Contents:
1 x Transmitter
1 x Receiver that comes with an extra strong TPU Collar
1 x 1000ft/300 Metre heavy duty extra thick boundary wire
1 x USB Charging Plug
1 x Set Of Instructions
20 x Visual Training Flags

You can add the following if Needed:
1. Extra collar receiver if you have more than one dog €39.95
2. Extra roll of heavy duty extra thick wire if you need to cover more than 200 Metre area €19.95
**All can be purchased separately**